top of page
Parasound NewClassic 275 v.2 2 Channel Power Amplifier
 
NewClassic 275 v.2
 
Features | Specs | Reviews | Support
  • 90 watts x 2 into 8 Ω (all channels driven)
  • 150 watts x 2 into 4 Ω or 2 Ω (all channels driven)
  • 200 watts x 1 bridged into 8 Ω or 4 Ω
  • 20 amps peak current per channel
  • 2 Ohm stable operation with load selector switch
  • Two pairs of speaker outputs with front panel A/B buttons
  • Rear-mounted lockout switch disables front A/B buttons
  • High pass filter, switchable for 20Hz or 40Hz
  • Automatic on/off by DC trigger with looping output
  • Automatic on/off by audio signal with 2 sensitivity settings
  • Fully discrete circuitry with high current toroid transformer
  • Bridging switch for stereo or mono operation
  • Efficient, low heat design
  • DC Servo and relay protection circuits
  • Rear-mounted left and right gain controls
  • Standby, channel status and high temperature indicators
  • Gold-plated RCA input jacks
  • Heavy duty 24k gold-plated 5-way speaker terminals
  • 115/230v selector on rear panel
  • 1U rack mount kit available separately (Model RMK11)
     Power Output - (RMS power, 20 Hz - 20 kHz)
 

Parasound NewClassic 275 v.2 2 Channel Power Amplifier

C$1,450.00Price

  • All Channels Driven
    90 watts x 2, 8Ω
    150 watts x 2, 4Ω
    150 watts x 2, 2Ω (Load switch set to 2-3Ω)

     

    Bridged Mono
    200 watts x 1, 8Ω
    200 watts x 1, 4Ω (Load switch set to 2-3Ω)

     

    Current Capacity
    20 amps peak per channel

     

    Frequency Response
    20 Hz - 50 kHz, +0/-3 dB, 1 watt

     

    Dynamic Headroom - 1.3 dB

     

    Total Harmonic Distortion
    0.35% at full rated output
    0.025% at average listening levels

     

    IM Distortion - 0.05 %

     

    Transient IM Distortion - Not measurable

     

    S/N Ratio
    110 dB at rated output, IHF A-weighted
    103 dB at rated output, unweighted
    93 dB at 2.828 V output, IHF A-weighted
    84 dB at 2.828 V output, unweighted

     

    Input Impedance - 33 k Ω

     

    Input Sensitivity
    800 mV for full rated output (28dB)

     

    Inter-Channel Crosstalk
    80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz

     

    Damping Factor - Over 150 at 20Hz

    12V Trigger Turn On - DC 9 - 12V, 15 mA

     

    Audio Turn On
    Quieter: 1 mV
    Louder: 6 mV

     

    AC Power Requirement
    110 - 120 V / 220 -240 V, 50 - 60 Hz
    0.5 watts standby
    25 watts Idle (no audio)
    350 watts full output

     

    Dimensions
    Width: 17.25" 
    Depth: 16" with cables connected
    Height with feet: 2.5", 1.75" panel only (1U)
     

    Net Weight - 20 lbs.

     

    Rack Mount Accessory
    RMK11 (May be Purchased Separately)

bottom of page