Features 

 

  • Input/Outputs:
    - 2 Multi channel (7.1) inputs for surround sound movies and music
    - 7 Stereo inputs (one balanced XLR input)
    - 1 MM or MC phono input
    - Front panel input jack for portable MP3 player
    - Unbalanced RCA and balanced XLR 7.1 outputs
    - Subwoofer output with analog bass management
    - Serial port for RS-232 control
    - Rear panel IR input jack
    - 3 different 12v trigger outputs
    - High quality headphone output

 

  • Software Features:
    - Custom input naming for all inputs
    - Theater bypass mode for connecting a digital surround receiver
    - Source input level matching
    - Headphone level offset
    - Analog bass management for stereo inputs
    - Links to Parasound Zhd HDMI selector (does not decode audio)

 

  • Other Features:
    - Relay-switched input select, mute & tone control engage/bypass
    - Full-featured remote control
    - Bass and Treble adjustable by remote
    - Tone controls engage/bypass by remote
    - Left/Right balance adjust by remote
    - Front/Rear balance adjust by remote
    - Subwoofer output level trim by remote
    - 20 dB partial mute and full mute by remote
    - 5 brightness settings for front panel display
    - Three 12V trigger outputs for 3 different functions
    - 12V trigger can be activated by remote control
    - Rack mount kit available, (2 rack spaces without feet)

 

Parasound Halo P7 7.1 Channel Preamplifier

C$3,225.00Price
  • Frequency Response: 5 Hz - 100 kHz, +0/-3 dB

     

    Total harmonic distortion: < 0.006% at 20 kHz

     

    S/N ratio:
       > 110 dB, input shorted, IHF A-weighted
       > 95 dB, input shorted, unweighted

     

    Cross-talk: 85 dB at 20 kHz

     

    Line Input Impedance :
       Unbalanced: 14.2k Ω
       Balanced: 4.7k Ω per leg

     

    Phono Input Impedance :
       MM setting: 47k Ω
       MC setting: 100 Ω

     

    Output Impedance :
       Unbalanced: < 60 Ω
       Unbalanced: < 60 Ω per leg

     

    Input Sensitivity:
       200 mV for 1 V output
       Total Gain: 14 dB (Volume limiter set to 110)
       Maximum Output: 8 V (Vol. Limiter set to 110)

     

    XLR Pin Identification
       1 = Ground (Shield)
       2 = Positive
       3 = Negative 

     

    AC Power Requirement:

       100 - 250 V / 50 - 60 Hz (voltage is automatically selected)

       10 watts standby

       65 watts when turned on

     

    Dimensions
       Width: 17-1/4" 
       Height without feet: 3-1/2" 
       Height with feet: 4-1/8"  
       Depth: 13-3/4" 
     

    Net Weight: 13.5 lbs. (6.1 kg)

     

    Shipping Weight: 20.5 lbs. (9.3 kg)

     

    Rack Mount Accessory
       HRA 2 (May be purchased separately)