MARINE APPLICATION SPEAKERS
Excessive moisture, corrosive salt spray, harsh UV rays and general temperature fluctuations all call for an extreme speaker; a custom install speaker designed expressed for environments where excessive moisture is an issue.
Quick Specs
- Santoprene Thermoplastic Elastomer surrounds
- E-Coated Corrosion-resistant chassis and clamps
- Conformal Coating on PCB’s and Crossover
- Stainless-steel Micro-Perf Grille
- Weather-resistant rubber ring with grommets secures grille to speaker
- Stainless Steel Screws and springs
Paradigm CI Pro Series P80-RX - each
CI Pro P80-RX Specifications
Design
2-driver, 2-way in-ceiling, SHOCK-MOUNT™ Isolation Mounting System, nylon-blended rigid baffle
Crossover
2nd-order electro-acoustic at 2.5 kHz
Frequency Response On-Axis
±3 dB from 64 Hz - 22 kHz
Frequency Response 30° Off-Axis
±3 dB from 64 Hz - 18 kHz
High Frequency Driver
1" (2.5cm) X-PAL™ dome, ferro-fluid damped / cooled, Reduced Edge Diffraction (RED™) Technology, Perforated Phase-Aligning (PPA™) Tweeter Lens
Mid/Bass Frequency Driver
8" (20.3cm) mineral-filled polypropylene cone, overmolded Active Ridge Technology (ART™) surround, die-cast aluminum chassis
Low Frequency Extension
39 Hz
Sensitivity Room / Anechoic
92 dB / 88 dB
Impedance
Compatible with 8 ohms
Suitable Amplifier Power Range
15-110 W
Maximum Input Power
80 W
Finishes
White, paintable grille, black/grey speaker
Weight
6.4 lbs. (2.9 kg)
Overall Dimensions
10.25" (26.0cm) Diameter
4.5" (11.4cm) DepthCut-Out Dimensions
9.1875" (23.3cm) Diameter
Minimum Mounting Depth
Depth required is the distance
between 1/2" drywall, or similar material.3.875" (9.8cm)
Specifications are subject to change without notice