The DP-300F has been designed with heavier base construction for reduced vibration and improved performance. The all new tonearm has a removable headshell making cartridge replacement simple. The standard mount headshell allows for any standard mount cartridge between 5 ~ 10 grams to be mounted and balanced. The automatic startup feature allows the turntable to begin play with the touch of a button, and once play has been completed, the tonearm will be returned to the armrest gently so that the stylus and record are not damaged or scratched. The turntable is made of rigid diecast aluminum to produce uniform rotation for smooth flutter free operation. There is also a manual lifter mechanism that allows you to place the needle on the record wherever you want, so you can skip to a different song in the middle of a side.
The DP-300F includes a built-in phono equalizer to connect the player to an integrated amp or receiver that does not have its own phono input. This turntable is powered by a DC servo motor and belt drive system and has rotation speeds of 33 1/3 or 45 rpm. It comes with a MM cartridge so that you can begin to enjoy your analog record collection as soon as you connect the DP-300F to your home hi-fi system.
Fully Automatic Player
Simply press the START button to start playing vinyl. The tone arm automatically moves and plays the record and then returns when playback ends. Different cartridges can be used as desired, and since fine adjustments can also be made for anti-skating and zero balance, ideal conditions for playing a record can be achieved.
Straight Tone Arm
The DP-300F's straight tone arm brings out the maximum performance of cartridges with superior tracing capabilities. The supplied cartridge can be replaced with a variety of commercially available cartridges. (Compatible cartridge weight: 5.0 - 10.0g)
Includes High-grade MM Cartridge
Diecast Aluminum Turntable
The DP-300F's turntable has been constructed of diecast aluminum to achieve high inertial mass for stable rotation. The vibration-resistant turntable sheet is about 5mm thick and uses hologram vibration analysis to improve its ability to hold a record.
Built-in PHONO Eeualizer
Since the DP-300F includes a built-in PHONO equalizer, it can be connected directly to a mini component or integrated amp that does not have a PHONO terminal.
(ON / OFF switchable)
Manual Arm Lifter
The DP-300F is also equipped with an arm lifter mechanism to facilitate manual operation. The arm lifter makes it easy to place or remove the needle from any location on the record.
Denon DP-300F Fully Automatic Analog Turntable
Drive Type: Belt-drive
Motor: DC Servo Motor
Speeds: 33-1/3 rpm, 45 rpm
Wow and Flutter: 0.1% WRMS
Signal to Noise Ratio: 60 dB
Tone Arm Style: Static Balanced Straight Type
Tone Arm Effective Length: 8.72" / 221.5 mm
Overhang: 0.75" / 19 mm
Compatible Cartridge Weight: 5.0 - 10.0 g (excluding headshell)
Cartridge: MM Type
Cartridge Weight: 5 g
Output Voltage: Equalizer OFF: 2.5 mV
Equalizer ON: 150 mV
Headshell Weight: 10g / 98 mN (including screws and nuts)
Replacement Headshell: PCL-310BK
Stylus Pressure Range: 0 - 4.0 g ( 0.1 g increments)
Optimum Stylus Pressure: 2.0 g (19.6 mN)
Replacement Stylus: DSN-85
Power Supply: AC 120 V, 60 Hz
Power Consumption: 2 W
Dimensions: 17.1"W x 4.8"H x 15.0"D (including feet)
Weight: 12.13 Lbs.
Specifications are subject to change without notice.